Forums

Hello all! :D

This topic is dedicated to 3D Printing, don't hesitate to share your creations with the community

------
I will start with my own creations!
This was mainly created for 7thCitadel but since they share a lot in common, they should be usable as they are in the 7thContinent as well.

I have already shared with the comunity on the 7thDiscord.

Everything started when I ruined some of my dividers. since I have a 3D printed and I enjoy using it, I decided to design my own.
Tha also solved the main issue I had with the default dividers, there are no dividers for those frequently used sets of cards (049,1 99, 299, 149 etc... you get the point) so every time I had to dig through those it was a little pain see where they started because they are part of a bigger chunk of chards.
My other trouble was the map itself, sometimes we would scout through it in an unexpected direction so the space on the table was not enough, moving them all is always a pain, but not with my Map Lock System, you put the card in it and then you connect it to existing map pieces and they all lock together, you can move it around, and they will not move if you accidentally (or not) touche the map. See for yourself!

Quality of gameplay has increased greatly in my case!

You can find:

• Card Dividers, in multiple formats
  
• A Map Lock system to help you lay down map tiles
  
• Trays in various formats
  

==> Please find additional pictures and the print profiles on MakerWorld:
https://makerworld.com/fr/models/1240549-7th-citadel-map-lock-system-trays-dividers







Please share your feedback if you have any!
Thank you.